Aries Electronics - Your Best Source for Interconnection and Packaging Solutions

Series X55X Universal Zero-Insertion-Force DIP Test Socket

Series X55X Universal Zero-Insertion-Force (ZIF) DIP Test Socket
CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on quantity. NOTE: Aries reserves the right to change product specifications without notice.FEATURES

  • Aries Universal Test socket accepts devices on 0.300 to 0.600 [7.62 to 15.24] centers.
  • All pin count sockets go into PCB with either 0.300 or 0.600 [7.62 to 15.24] centers.
  • Contacts are normally closed to eliminate dependence on plastic to sustain contact.
  • Socket handle can be configured with closed contacts (on) when in the UP or DOWN position, and can be mounted on either the right or left side.
  • • Sockets can be soldered into PCBs or plugged into any socket. Socket fits into Aries or any competitive test socket receptacle.

GENERAL SPECIFICATIONS

  • SOCKET BODY: black UL 94V-0 glass-filled Polyphenylene Sulfide (PPS)
  • HANDLE: Stainless Steel
  • HANDLE KNOB: Brass 360, 1/2-hard
  • CONTACTS: BeCu 172 per QQ-C-533 or NiB (Spinodal)
  • CONTACT PLATING: 50µ [1.27µ] min. Ni under-plate per QQ-N-290, over-plated with either 200µ [5.08µ] min. matte Sn per ASTM B545-97 or 200µ [5.08µ] 90/10 Sn/Pb per MIL-T-10727 or 10µ [0.25µ] min. Au per MIL-G-45204
  • Spinodal CONTACT PLATING: 50µ [1.27µ] min. NiB
  • CONTACT CURRENT RATING: 1 amp
  • INSULATION RESISTANCE: 1000 mΩ min.
  • DIELECTRIC WITHSTANDING VOLTAGE: 1000 VAC
  • LIFE CYCLE: 25,000 to 50,000 cycles
  • OPERATING TEMPERATURE: min. -67°F [-55°C]; max. 221°F [105°C] for Sn plating; 302°F [150°C] for Au plating; 392°F [200°C] for NiB plating
  • RETENTION FORCE (closed): 55g/pin based on a 0.020 [0.51] dia. test lead
  • ACCEPTS LEADS: 0.015-0.045 [0.38-1.14] wide, 0.110-0.280 [2.79-7.11] long

MOUNTING CONSIDERATIONS

  • See Socket Footprint below
NOTICE   ORDERING INFORMATION

ALL DIMENSIONS IN INCHES [MILLIMETERS]

ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED

“A” (# PINS PER ROW x 0.100 [2.54]) + 0.590 [14.99]
“B” (# PINS PER ROW -1) x 0.100 [2.54]
“C” (# PINS PER ROW x 0.100 [2.54]) + 0.415 [10.54]

CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS

PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED

  

 
Reference-Only Drawing for Series X55X Universal Zero-Insertion-Force (ZIF) DIP Test Socket

 

Download Data Sheet 10001, Rev AA