Aries Electronics - Your Best Source for Interconnection and Packaging Solutions

Zero-Insertion-Force (ZIF) PGA Test and Burn-in Sockets
CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on quantity. NOTE: Aries reserves the right to change product specifications without notice.ZIF PGA Test & Burn-in Socket for Any Footprint on Std 13x13 to 21x21 Grid

FEATURES

  • A strong, metal cam activates the normally closed contacts, preventing dependency on plastic for contact force.
  • The handle can be provided on right or left hand side. Consult factory for special handle requirements.
  • Any footprint accepted on standard 13x13 to 21x21 grid

GENERAL SPECIFICATIONS

  • Socket Body: black UL 94 V-0 Polyphenylene Sulfide (PPS)
  • Contacts: either BeCu 174 1/2-hard, or NiB (Spinodal)
  • BeCu Contact Plating Options: “2” 30μ [0.76μm] min. Au per MIL-G-45204 on contact area, 200μ [5.08μm] min. matte Sn per ASTM B545-97 on solder tail, both over 30μ [0.76μm] min. Ni per QQ-N-290 all over. Consult factory for other plating options not shown
  • Spinodal Contact Plating Only: “6” – 50µ [1.27µ] min. Ni-Boron
  • Handle: Stainless Steel
  • Contact Current Rating: 1 amp
  • Operating Temperatures: -85°F to 257°F [-65°C to 125°C] Au plating; -85°F to 392°F [-65°C to 200°C] Ni-plated Spinodal
  • Accepts Leads: 0.014-0.026 [0.36-0.66] in dia., 0.120-0.290 [3.05-7.37] long

MOUNTING CONSIDERATIONS

  • Suggested PCB Hole Siz:e 0.032 ±0.002 [0.81 ±0.05] diameter
  • See PCB Footprint below
  • Plugs into Standard PGA Socket

NOTE: 13X13 to 21X21 GRID STANDARD

10004 Ordering Information

NOTICE

RoHS-compliantALL DIMENSIONS IN INCHES [MILLIMETERS]

CONSULT FACTORY FOR OTHER SIZES & CONFIGURATIONS

ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED

PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED
Grid Size
No. of Pins
Dim. “C”
Dim. “A”
Dim. “B”
Dim. “D”
12 x 12*
144
1.100 [27.94]
1.894 [48.10]
1.510 [38.35]
1.675 [42.54]
13 x 13
169
1.200 [30.48]
14 x 14*
196
1.300 [33.02]
2.094 [53.20]
1.710 [43.43]
1.875 [47.62]
15 x 15
225
1.400 [35.56]
16 x 16*
256
1.500 [38.10]
2.294 [58.26]
1.910 [48.51]
2.075 [52.70]
17 x 17
289
1.600 [40.64]
18 x 18*
324
1.700 [43.18]
2.494 [63.34]
2.110 [53.59]
2.275 [57.78]
19 x 19
361
1.800 [45.72]
20 x 20*
400
1.900 [48.26]
2.694 [68.42]
2.310 [58.67]
2.475 [62.86]
21 x 21
441
2.000 [50.80]

* Top and Right-hand Side Row left out

Reference-Only Drawing for Zero-Insertion-Force (ZIF) PGA Test and Burn-in Sockets

10004 Footprint Information

 

Download Data Sheet 10004, Rev J