Aries Electronics - Your Best Source for Interconnection and Packaging Solutions

Series 516 ZIF (Zero-Insertion-Force) Socket

Series 516 Zero-Insertion-Force (ZIF) Socket ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. IN ADDITION TO THE STANDARD PRODUCTS SHOWN ON THIS PAGE, SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATION CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT SPECIFICATION WITHOUT NOTICE. FEATURES

  • A choice of 24, 28, or 40 pin count devices can be inserted without bending or otherwise damaging the legs, since no force is required to either insert or remove the component from the socket.
  • Contacts are normally open and are closed by a unique cam action controlled by dual lever arms.
  • The last 15° of movement of the cam provides a wiping action to the contacts on the legs of the device to remove any residue, ensuring a gas-tight seal.
  • Tapered entry guides help guide the device legs into the mating position with the contacts.

GENERAL SPECIFICATIONS

  • Body, Handle, and Cam black UL 94 V-0 Glass-filled 4/6 Nylon
  • Pins Beryllium-Copper 170 or 172, 1/2-hard
  • Pin Plating “-10” 200µ [5.08µ] min. matte Tin per ASTM B545-97(2004)e1 over 50µ [1.27µ] min. Nickel per SAE-AMS-QQ-N-290; “-10TL” 200µ [5.08µ] min. 90/10 Tin/Lead per MIL-T-10727 over 50µ [1.27µ] min. Nickel per SAE-AMS-QQ-N-290; “-11” 10µ [0.25µ] min. Gold per MIL-G-45204 over 50µ [1.27µ] min. Nickel per SAE-AMS-QQ-N-290 – Consult factory for availability
  • Contact Current Rating 1 amp
  • Operating Temperature 221°F [105°C] Tin and Tin/Lead plating; 257°F [125°C] Gold plating
  • Minimum Retention Force (when closed) 15g/lead, based on 0.008 [0.20] thick Test Lead
  • Accepts most Lead widths with lengths from 0.075 to 0.250 [1.91 to 6.35]

MOUNTING CONSIDERATIONS

  • Suggested PCB Hole size 0.035 ±0.002 [0.89 ±0.05] diameter

 

NOTICE   ORDERING INFORMATION

RoHS-compliantALL DIMENSIONS IN INCES [MILLIMETERS]

“A” (# PINS PER ROW x 0.100 [2.54]) + 0.220 [5.59]
“B” (# PINS PER ROW -1) x 0.100 [2.54]

ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED

PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED

  

 

 

Reference-Only Drawing for Series 516 Zero-Insertion-Force (ZIF) Socket
 
Std Lever Arm
Short Lever Arm
Midget Lever Arm
# Pins
Dim. “C”
Dim. “D”
Dim. “E”
Dim. “D”
Dim. “E”
Dim. “D”
Dim. “E”
24
0.785 [19.94]
0.76 [19.3]
0.63 [16.0]
0.60 [15.2]
0.52 [13.2]
0.41 [10.4]
0.42 [10.7]
28
0.785 [19.94]
0.76 [19.3]
0.63 [16.0]
0.60 [15.2]
0.52 [13.2]
0.41 [10.4]
0.42 [10.7]
40
0.780 [9.81]
0.76 [19.3]
0.63 [16.0]
0.60 [15.2]
0.52 [13.2]
0.41 [10.4]
0.42 [10.7]

 

Download Data Sheet 10017, Rev E