Aries Electronics - Your Best Source for Interconnection and Packaging Solutions

Instructions for Universal SOIC Socket

Instructions for Universal SOIC Socket
CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on quantity. NOTE: Aries reserves the right to change product specifications without notice.SOCKET SETUP

  1. Loosen locator lock screws
  2. Slide one of the locators to a position that would place the device to be tested centrally on the contacts and tighten its lock screw
  3. Slide the second locator lock screw (clearance is required for ease-of-loading and removal)
  4. Remove screw for hinge plate
  5. Swing hinge plate up out of socket top
  6. Loosen pressure plate locking screws and slide them out
  7. Position pressure plates so they will press down on the feet (part of lead that gets soldered to board) of a gull wing device (see Detail “A”). If the device has J-leads, position pressure plates to press down on top of device's body (see Detail “B”) and tighten locking screws.
  8. Swing hinge plate back into the socket top and tighten the screw for the hinge plate
  9. Double check your settings
Reference-Only Drawing for Instructions for Universal SOIC Socket

 

Download Data Sheet 10020, Rev AA