Series 102 thru 111 DIP Jumpers

Aries offers a wide array of DIP jumper configurations and wiring possibilities for all your programming needs.
Reliable, electronically tested solder connections.
Protective covers are ultrasonically welded on and provide strain relief for cables.
10-color cable allows for easy identification and tracing.
Consult factory for jumper lengths under 2.000 [50.80].

Header Body and Cover black UL 94 V-0 4/6 Nylon
Header Pins Brass 1/2-hard
Standard Pin Plating 10µ [0.25µ] min. Gold per MIL-G-45204 over 50µ [1.27µ] min. Nickel per QQ-N-290
Optional Plating “T” 200µ [5.08µ] min. matte Tin per ASTM B545-97(2004)e1 over 50µ [1.27mm] min. Nickel per QQ-N-290; “TL” 200µ [5.08µ] 90/10 Tin/Lead per MIL-T-10727 Type I over 50µ [1.27µ] min. Nickel per QQ-N-290
Cable Insulation UL Style 2697 Polyvinyl Chloride (PVC)
Laminate clear PVC, Self-extinguishing*
0.050 [1.27] Pitch Conductors 28-AWG, 7/36-strand, tinned Copper per ASTM B 33 (0.039 [0.99]; Pitch Conductors 26-AWG, 7/34-strand)
Cable Current Rating 1 amp at 10°C [50°F] above ambient
Cable Voltage Rating 300V
Cable Temperature Rating 176°F [80°C]
Cable Capacitance 13.0pF/ft. [42.7pF/meter] nominal at 1MHz*
Crosstalk 10’ sample, 5ns Rise Time with 2 lines driven; Near end 4.7%; Far end 4.3% nominal*
Propagation Delay 1.5ns/ft. [4.9ns/meter] nominal*
Insulation Resistance 10¹⁰ Ohms (10 ft. [3 meters] min.)

* Applies to 0.050 [1.27] Pitch Cable Only

NOTICE		ORDERING INFORMATION
ALL DIMENSIONS IN INCES [MILLIMETERS] CONSULT FACTORY FOR OTHER SIZES & CONFIGURATIONS ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED		See Data Sheet 11006 for other configurations and additional information.

SINGLE END DIP JUMPER WIRE LIST