Aries Electronics - Your Best Source for Interconnection and Packaging Solutions

Series 112, 113, and 114 Deci-Center™ Jumpers

Series 112, 113 & 114 Deci-Center™ Jumpers ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. IN ADDITION TO THE STANDARD PRODUCTS SHOWN ON THIS PAGE, SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATION CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT SPECIFICATION WITHOUT NOTICE. FEATURES

  • Aries offers a wide array of DIP jumper configurations and wiring possibilities for all your programming needs.
  • Reliable, electronically tested solder connections.
  • DIP-end cable is potted to provide strain relief.
  • Protective covers are also provided on header.
  • Pitch bars help maintain 0.100 [2.54] conductor spacing.
  • 10-color cable allows for easy identification and tracing.
  • Consult factory for jumper lengths under 3.000 [76.20].

GENERAL SPECIFICATIONS

  • Header Body and Pitch Bar black UL 94 V-0 Glass-filled 4/6 Nylon
  • Header Pins Brass 1/2-hard
  • Pin Plating 10µ [0.25µ] min. Gold per MIL-G-45204 over 50µ [1.27µ] min. Nickel per SAE-AMS-QQ-N-290
  • Cable Insulation UL Style 2697 Polyvinyl Chloride (PVC)
  • Cable Laminate clear PVC, Self-extinguishing*
  • 0.050 [1.27] Pitch Conductors 28-AWG, 7/36-strand, tinned Copper per ASTM B 33 (0.039 [0.99] Pitch Conductors 26-AWG, 7/34-strand)
  • Cable Current Rating 1 amp at 10°C [50°F] above ambient
  • Cable Voltage Rating 300V
  • Cable Temperature Rating 176°F [80°C]
  • Cable Capacitance 13.0pF/ft. [42.7pF/meter] nominal at 1MHz*
  • Crosstalk 10’ sample, 5ns Rise Time with 2 lines driven; Near end 4.7%; Far end 4.3% nominal*
  • Propagation Delay 1.5ns/ft. [4.9ns/meter] nominal*
  • Insulation Resistance 1010 Ohms (10 ft. [3 meters] min.)

MOUNTING CONSIDERATIONS

  • Suggested PCB Hole size 0.033 ±0.002 [0.86 ±0.05] diameter

* Applies to 0.050 [1.27] Pitch Cable Only

 

NOTICE   ORDERING INFORMATION

RoHS-compliantALL DIMENSIONS IN INCES [MILLIMETERS]

“X” (# CONDUCTORS -1) x 0.100 [2.54]

ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED

PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED

  
Ordering Information for Aries Series 112, 113, and 114 Deci-Center™ Jumpers

 

Reference-Only Drawing for Series 112, 113 & 114 Deci-Center™ Jumpers
Centers “C”
Dim. “D”
Available Sizes
0.300 [7.62]
0.395 [10.03]
4 thru 20
0.400 [10.16]
0.495 [12.57]
22
0.600 [15.24]
0.695 [17.65]
24, 28, 40

 

Download Data Sheet 11008, Rev E