Aries Electronics - Your Best Source for Interconnection and Packaging Solutions
Series 112, 113, & 114 Deci-Center™ Jumpers
CUSTOMIZATION: IN ADDITION TO THE STANDARD PRODUCTS SHOWN ON THIS PAGE, ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. NOTE: ARIES RESERVES THE RIGHT TO CHANGE PRODUCT SPECIFICATIONS WITHOUT NOTICE.

Series 112, 113, and 114 Deci-Center™ Jumpers

FEATURES

  • Aries offers a wide array of DIP jumper configurations and wiring possibilities for all your programming needs.
  • Reliable, electronically tested solder connections.
  • DIP-end cable is potted to provide strain relief.
  • Protective covers are also provided on header.
  • Pitch bars help maintain 0.100 [2.54] conductor spacing.
  • 10-color cable allows for easy identification and tracing.
  • Consult factory for jumper lengths under 3.000 [76.20].

GENERAL SPECIFICATIONS

  • HEADER BODY AND PITCH BAR: black UL 94V-0 glass-filled 4/6 Nylon
  • HEADER PINS: Brass 1/2-hard
  • PIN PLATING: 10µ [0.25µ] min. Au per MIL-G-45204 over 50µ [1.27µ] min. Ni per SAE AMS-QQ-N-290B
  • CABLE INSULATION: UL Style 2697 Polyvinyl Chloride (PVC)
  • CABLE LAMINATE: clear PVC, self-extinguishing*
  • 0.050 [1.27] PITCH CONDUCTORS: 28-AWG, 7/36-strand, tinned Cu per ASTM B 33
  • 0.039 [0.99] PITCH CONDUCTORS: 26-AWG, 7/34-strand)
  • CABLE CURRENT RATING: 1 amp at 10°C [50°F] above ambient
  • CABLE VOLTAGE RATING: 300V
  • CABLE TEMPERATURE RATING: 176°F [80°C]
  • CABLE CAPACITANCE: 13.0pF/ft. [42.7pF/meter] nominal at 1MHz*
  • CROSSTALK: 10’ sample, 5ns rise time with 2 lines driven; near end 4.7%; far end 4.3% nominal*
  • PROPAGATION DELAY: 1.5ns/ft. [4.9ns/meter] nominal*
  • INSULATION: RESISTANCE: 1010Ω (10 ft. [3 meters] min.)

MOUNTING CONSIDERATIONS

  • SUGGESTED PCB HOLE SIZE: 0.033 ±0.002 [0.86 ±0.05] dia.

* Applies to 0.050 [1.27] Pitch Cable Only

NOTICE   ORDERING INFORMATION

ALL DIMENSIONS IN INCHES [MILLIMETERS]

CONSULT FACTORY FOR OTHER SIZES & CONFIGURATIONS

ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED

PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED

 
Ordering Information for Aries Series 112, 113, and 114 Deci-Center™ Jumpers

See Data Sheet 11008 for other configurations and additional information.

Reference-Only Drawing for Series 112, 113, & 114 Deci-Center™ Jumpers
Wire #
Series
112, 113, 114
Pin Number
Series
112X, 113X, 114X
Pin Number
1
1
1
2
2
16
3
3
2
4
4
15
5
5
3
6
6
14
7
7
4
8
8
13
9
9
5
10
10
12
11
11
6
12
12
11
13
13
7
14
14
10
15
15
8
16
16
9
Reference-Only Cable Detail for Series 112, 113, & 114 Deci-Center™ Jumpers

 

Download Data Sheet 11009, Rev E