Aries Electronics - Your Best Source for Interconnection and Packaging Solutions
Series 200 thru 216 Male/Femaie DIP Jumpers
CUSTOMIZATION: IN ADDITION TO THE STANDARD PRODUCTS SHOWN ON THIS PAGE, ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. NOTE: ARIES RESERVES THE RIGHT TO CHANGE PRODUCT SPECIFICATIONS WITHOUT NOTICE.

Series 200 thru 216 Male/Female DIP Jumpers

FEATURES

  • Aries offers a wide array of DIP jumper configurations for all your programming needs.
  • Reliable, electronically tested solder connections.
  • Protective covers are ultrasonically welded on and provide strain relief for cables.
  • 10-color cable allows for easy identification and tracing.
  • Consult factory for jumper lengths under 2.000 [50.80].

GENERAL SPECIFICATIONS

  • BODY MATERIAL: black UL 94V-0 glass-filled 4/6 Nylon
  • SOLDER TAIL PINS: Brass, 1/2-hard
  • SOCKET CONTACTS: Grade A spring-tempered Phosphor Bronze per QQ-B-750
  • PIN AND CONTACT PLATING: 10µ [0.25µ] min. Au per MIL-G-45204 over 50µ [1.27µ] min. Ni per SAE AMS-QQ-N-290B
  • CABLE INSULATION: UL Style 2697 Polyvinyl Chloride (PVC)
  • LAMINATE: clear PVC, self-extinguishing
  • CONDUCTORS: 28-AWG, 7/36-strand, tinned Cu per ASTM B 33
  • CABLE CURRENT RATING: 1 amp at 10°C [50°F] above ambient
  • CABLE VOLTAGE RATING: 300V
  • CABLE TEMPERATURE RATING: 176°F [80°C]
  • CABLE CAPACITANCE: 13.0pF/ft. [42.7pF/meter] nominal at 1MHz
  • CROSSTALK: 10’ sample, 5ns Rise Time with 2 lines driven; Near end 4.7%; Far end 4.3% nominal
  • PROPAGATION DELAY: 1.5ns/ft. [4.9ns/meter] nominal
  • INSULATION RESISTANCE: 1010Ω (10 ft. [3 meters] min.)

MOUNTING CONSIDERATIONS

  • SUGGESTED PCB HOLE SIZE: 0.033 ±0.002 [0.86 ±0.05] dia.
NOTICE   ORDERING INFORMATION

ALL DIMENSIONS IN INCHES [MILLIMETERS]

CONSULT FACTORY FOR OTHER SIZES & CONFIGURATIONS

ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED

PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED

  
Ordering Information for Aries Series 200 thru 216 Male/Female DIP Jumpers

See Data Sheet 11013 for other configurations and additional information.
Reference-Only Drawing for Series 200 thru 216 Male/Femaie DIP Jumpers
Centers “C”
Dim. “D”
Dim. “H”
Available Sizes
0.300 [7.62]
0.395 [10.03]
0.390 [9.90]
8, 14, 16, 18, 20
0.400 [10.16]
0.495 [12.57]
0.490 [12.45]
22
0.600 [15.24]
0.695 [17.65]
0.690 [17.54]
24, 28, 40

 

Download Data Sheet 11012, Rev F