Aries Electronics - Your Best Source for Interconnection and Packaging Solutions
Series 511 Standard DIP Sockets with Solder Tail Bifurcated Contacts
CUSTOMIZATION: IN ADDITION TO THE STANDARD PRODUCTS SHOWN ON THIS PAGE, ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. NOTE: ARIES RESERVES THE RIGHT TO CHANGE PRODUCT SPECIFICATIONS WITHOUT NOTICE.

Series 511 Standard DIP Socket with Solder Tail Bifurcated Contacts

FEATURES

  • Standard DIP sockets are available with Solder Tail or Wire Wrap Pins, all with bifurcated contacts. Consult Data Sheet 12005 for Wire Wrap Pins.
  • Aries offers these standard DIP sockets in more sizes than any other manufacturer.

GENERAL SPECIFICATIONS

  • STANDARD BODY: black UL 94V-0 glass-filled 4/6 Nylon
  • BIFURCATED CONTACTS: Grade A spring-tempered Phosphor Bronze per QQ-B-750
  • PIN PLATING: “0” 50-130µ min. matte Sn per ASTM B545-97(2004)e1 over 50µ Ni per SAE AMS-QQ-N-290B; “0TL” 50-130µ 90/10 Sn/Pb per MIL-T-10727 Type 1 over 50µ Ni per SAE AMS-QQ-N-290B; “1” 10µ [0.25µ] min. Au per MIL-G-45204 over 50µ Ni per SAE AMS-QQ-N-290B
  • CONTACT CURRENT RATING: 1 amp
  • OPERATING TEMPERATURE: -67°F to 221°F [-55°C to105°C] Sn; -67°F to 257°F [-55°C 125°C] Au
  • INSERTION FORCE: 110g/pin average
  • WITHDRAWAL FORCE: 75g/pin average
  • ACCEPTS: flat leads up to 0.014 thick x 0.020 wide [0.36 x 0.51], Round Leads up to 0.020 [0.51] dia.
  • SOCKET ACCEPTS: lead lengths from seating plane from 0.075-0.160 [1.91-4.06]

MOUNTING CONSIDERATIONS

  • SUGGESTED PCB HOLE SIZE: 0.035 ±0.002 [0.89 ± 0.05] dia.
NOTICE   ORDERING INFORMATION

ALL DIMENSIONS IN INCHES [MILLIMETERS]

CONSULT FACTORY FOR OTHER SIZES & CONFIGURATIONS

ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED

“A” (# PINS PER ROW x 0.100 [2.54]) +0.050 [1.27]
“B” (# PINS PER ROW -1) x 0.100 [2.54]

PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED

  

 

 

 

 

 

 

 

Consult Data Sheet 12005 for Wire Wrap Pins.
Reference-Only Drawing for Series 511 Standard DIP Sockets with Solder Tail Bifurcated Contacts
Centers “C”
Width “D”
Available Sizes
0.200 [5.08]
0.290 [7.36]
8, 10
0.300 [7.62]
0.390 [9.90]
8, 14-20
0.400 [10.16]
0.490 [12.45]
22
0.600 [15.24]
0.690 [17.54]
8-24, 28-40, 48

 

Download Data Sheet 12004, Rev E