Aries Electronics - Your Best Source for Interconnection and Packaging Solutions
Series 0503 Pin-Line Collet Sockets with Wire Wrap Pins
CUSTOMIZATION: IN ADDITION TO THE STANDARD PRODUCTS SHOWN ON THIS PAGE, ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. NOTE: ARIES RESERVES THE RIGHT TO CHANGE PRODUCT SPECIFICATIONS WITHOUT NOTICE.

Series 0503 Pin-Line™ Collet Socket with Wire Wrap Pins

FEATURES

  • Rows of socket strips may be mounted on any centers and are end-to-end or side-by-side stackable for 0.100 [2.54] grid or matrix patterns.
  • Available with wire wrap or solder tail pins. Consult Data Sheet 12013 for solder tail pins.
  • ”Break” feature allows strips to be cut to the number of positions desired.

GENERAL SPECIFICATIONS

  • BODY MATERIAL: red UL 94-HB glass-filled Nylon – Consult factory for UL 94V-0 material
  • PIN BODY: Brass 360 1/2-hard per UNS C36000 ASTM B16-85
  • PIN BODY PLATING: either 10µ [0.25µ] min. Au per MIL-G-45204 or 200µ [5.08µ] min. 93/7 Sn/Pb per MIL-P-81728 over 100µ [2.54µ] min. Ni per QQ-N-290
  • 4-FINGER COLLET CONTACT: BeCu per UNS C17200 ASTM B194-92
  • CONTACT PLATING: 30µ [0.76µ] min. Au per MIL-G-45204 over 50µ min. [1.27µ] Ni per QQ-N-290
  • CONTACT CURRENT RATING: 3 amps
  • OPERATING TEMPERATURE: 221°F [105°C] Sn plating; 257°F [125°C] Au plating
  • INSERTION FORCE: 180g/pin, based on 0.018 [0.46] dia. test lead
  • WITHDRAWAL FORCE: 90g/pin, based on 0.018 [0.46] dia. test lead
  • NORMAL FORCE: 140g/pin, based on 0.018 [0.46] dia. test lead
  • ACCEPTS LEADS: 0.015-0.025 [0.38-0.64] dia., 0.110-0.162 [2.79-4.11] long

MOUNTING CONSIDERATIONS

  • SUGGESTED PCB HOLE SIZE: 0.045 ±0.002 [1.14 ±0.05] dia.
NOTICE   ORDERING INFORMATION
ALL DIMENSIONS IN INCHES [MILLIMETERS]
 

 

 

 

 

 

Pin-Line™ Collet Socket also available with Solder Tail Pins. Consult Data Sheet 12013.
CONSULT FACTORY FOR OTHER SIZES & CONFIGURATIONS
 
ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED
 
“A” # PINS PER ROW x 0.100 [2.54]
“B” (# PINS PER ROW -1) x 0.100 [2.54]
  
PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED
  
Reference-Only Drawing for Series 0503 Pin-Line Collet Sockets with Wire Wrap Pins
 
Dim. “L”
2-level wire wrap
0.360 [9.14]
3-level wire wrap
0.500 [12.70]

 

Download Data Sheet 12014, Rev E