Aries Electronics - Your Best Source for Interconnection and Packaging Solutions

Series 600 DIP Header with Coined Contacts

Series 600 DIP Headers with Coined ContactsARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. IN ADDITION TO THE STANDARD PRODUCTS SHOWN ON THIS PAGE, SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATION CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT SPECIFICATION WITHOUT NOTICE. FEATURES

  • Aries offers a full line of DIP Headers, available with either Coined or Screw Machine Contacts. Consult Data Sheet 12035 for Screw Machine Contacts.
  • Snap-on, Protective Covers are available for all sizes shown below and accommodate 0.125 [3.18] to 0.750 [9.05] component heights. Consult Data Sheet 12033 for Protective Covers.
  • Body cavity design provides additional clearance for component mounting.

GENERAL SPECIFICATIONS

  • Standard Body black UL 94 V-0 4/6 Nylon
  • Coined Contacts Brass, 1/2-hard
  • Contact Plating “T” 200µ [5.08µ] min. matte Tin per ASTM B545-97(2004)e1 over 50µ [1.27µ] min. Nickel per QQ-N-290; “G” 10µ [0.25µ] Gold per MIL-G-45204 over 50µ [1.27µ] min. Nickel per QQ-N-290; “TL” 200µ [5.08µ]90/10 Tin/Lead per MIL-T-10727 Type I over 50µ [1.27µ] min. Nickel per QQ-N-290
  • Contact Current Rating 2 amps
  • Operating Temperature 221°F [105°C] Tin plating; 257°F [125°C] Gold plating
  • Fork Contacts accepts Leads up to 0.025 [0.64] diameter

MOUNTING CONSIDERATIONS

  • Suggested PCB Hole size 0.035 ±0.002 [0.89 ±0.05] diameter

 

NOTICE   ORDERING INFORMATION

RoHS-compliantALL DIMENSIONS IN INCES [MILLIMETERS]

CONSULT FACTORY FOR OTHER SIZES & CONFIGURATIONS

ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED

“A” (# PINS PER ROW x 0.100 [2.54]) +0.050 [1.27]
”B” (# PINS PER ROW -1) x 0.100 [2.54]

PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED

  

 

 

 

 

 

Consult Data Sheet 12033 for Snap-on Protective Covers and Data Sheet 12035 for Screw Machine Contacts.

 

Reference Only Drawing for Series 600 DIP Header with Coined Contacts
Centers “C”
Dim. “D”
Dim. “E”
0.300 [7.62]
0.395 [10.03]
0.252 [6.40]
0.400 [10.16]
0.495 [12.57]
0.352 [8.94]
0.600 [15.24]
0.695 [17.65]
0.552 [14.02]

 

Download Data Sheet 12032, Rev F