Aries Electronics - Your Best Source for Interconnection and Packaging Solutions
Series SP200 & SJ200 0.040 [1.02] Shorting Plugs and Jacks
CUSTOMIZATION: IN ADDITION TO THE STANDARD PRODUCTS SHOWN ON THIS PAGE, ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. NOTE: ARIES RESERVES THE RIGHT TO CHANGE PRODUCT SPECIFICATIONS WITHOUT NOTICE.

Series SP200 & SJ200 0.040 [1.02] Shorting Plugs and Jacks

FEATURES

  • These Shorting Plugs and Jacks are used in conjunction with Aries DIP Strips, available separately, for your programming needs. Consult Data Sheet 16007 and 16008 for details.
  • Convenient handle for insertion and withdrawal.

GENERAL SHORTING JACK (P/N SJ200) SPECIFICATIONS

  • BODY MATERIAL: black UL 94V-0 glass-filled 4/6 Nylon
  • PIN BODY: Brass 360 1/2-hard per UNS C36000 ASTM B16/B16M-05
  • PIN BODY PLATING: “SJ200” 200µ [5.08µ] min. Sn per ASTM B545 Type 1 over 100µ [2.54µ] min. Ni per SAE AMS-QQ-N-290B. “SJ200-TL” 200µ [5.08µ] min. 93/7 Sn/Pb per ASTM B545 over 100µ [2.54µ] min. Ni per SAE AMS-QQ-N-290B
  • 4-FINGER COLLET CONTACT: BeCu per UNS C17200 ASTM B194-08
  • CONTACT PLATING: 30µ [0.76µ] min. Au per MIL-G-45204 over 50µ [1.27µ] min. Ni per SAE AMS-QQ-N-290B
  • CONTACT CURRENT RATING: 8 amps
  • OPERATING TEMPERATURE: -67°F to 221°F [-55°C to 105°C]
  • INSERTION FORCE: 240g/pin, based on 0.040 [1.02] dia. test lead
  • WITHDRAWAL FORCE: 130g/pin, based on 0.040 [1.02] dia. test lead
  • NORMAL FORCE: 210g/pin, based on 0.040 [1.02] dia. test lead
  • ACCEPTS LEADS: 0.032-0.047 [0.81-1.19] dia., 0.130-0.180 [3.30-4.56] long

GENERAL SHORTING PLUG (P/N SP200) SPECIFICATIONS

  • BODY MATERIAL: black UL 94V-0 glass-filled 4/6 Nylon
  • PIN: Brass 260, 1/4- or 1/2-hard
  • PIN PLATING: 10µ [0.25µ] Au per MIL-G-45204 over 50µ [1.27µ] Ni per SAE AMS-QQ-N-290B
  • CURRENT RATING: 5 amps
  • OPERATING TEMPERATURE: -67°F to 257°F [-55°C to 125°C]
NOTICE   ORDERING INFORMATION

ALL DIMENSIONS IN INCHES [MILLIMETERS]

CONSULT FACTORY FOR OTHER SIZES & CONFIGURATIONS

ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED

PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED

  

 

 

 

Shorting Plugs are used with Aries Female DIP Strips, Series F40. Consult Data Sheet 16008 for details.

Shorting Jacks are used with Aries Male DIP Strips, Series M40. Consult Data Sheet 16007 for details.
Reference-Only Drawing for Series SP200 & SJ200 0.040 [1.02] Shorting Jacks
Reference-Only Drawing for Series SP200 & SJ200 0.040 [1.02] Shorting Plugs

 

Download Data Sheet 16009, Rev E