Aries Electronics - Your Best Source for Interconnection and Packaging Solutions
Correct-A-Chip™ with Collet Contacts
CUSTOMIZATION: IN ADDITION TO THE STANDARD PRODUCTS SHOWN ON THIS PAGE, ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. NOTE: ARIES RESERVES THE RIGHT TO CHANGE PRODUCT SPECIFICATIONS WITHOUT NOTICE.

Correct-A-Chip™ Socket with Collet Contacts

FEATURES

  • Correct-A-Chip™ technology solves problems associated with the use of alternate ICs (due to availability, obsolescence, need for better performance, etc.) by eliminating the need for new PCBs.
  • Available with either 0.300 [7.62] or 0.600 [15.24] row-to-row spacing.

GENERAL SPECIFICATIONS

  • FEMALE SOCKET MATERIAL: black UL 94V-0 glass-filled 4/6 Nylon
  • PCB: FR-4, 0.062 [1.56] or 0.094 [2.39] thick
  • MALE PIN: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M
  • MALE PIN PLATING: 200μ [5.08μ] Sn/Pb 93/7 per ASTM B579-73 over 100μ [2.54μ] Ni per SEA-AMS-QQ-N-290
  • FEMALE PIN BODY PLATING: 10μ [0.254μ] Au per MIL-G-45204 over 100μ [2.54μ] Ni per SEA-AMS-QQ-N-290
  • 4-FINGER COLLET CONTACT: BeCu per UNS C17200, ASTM B194-01
  • CONTACT PLATING: 10μ [0.25μ] Au per MIL-G-45204 over 50μ [1.27μ] Ni per SEA-AMSQQ-N-290
  • MINIMUM CONTACT CURRENT RATING: 1 amp at 5 VDC
  • OPERATING TEMPERATURE: 221°F [105°C]
  • INSERTION FORCE: 180g/pin; based on 0.018 [0.46] dia. test lead
  • WITHDRAWAL FORCE: 90g/pin; based on 0.018 [0.46] dia. test lead
  • NORMAL FORCE: 140g/pin; based on 0.018 [0.46] dia. test lead
  • SOCKET ACCEPTS: 0.015-0.025 [0.38-0.64] dia. leads, 0.100-0.125 [2.54- 3.18] long

MOUNTING CONSIDERATIONS

SUGGESTED PCB HOLE SIZE: 0.028 ±0.002 [0.71 ±0.05] dia.

NOTICE   ORDERING INFORMATION

ALL DIMENSIONS IN INCHES [MILLIMETERS]

ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED

CONSULT FACTORY FOR OTHER SIZES & CONFIGURATIONS

PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED

  

Consult Factory – Aries will assign a special P/N

EASY-TO-USE WORKSHEET 18001 (PDF)
Reference-Only Drawing of Dimention "A" Drawing of Correct-A-Chip™ with Collet Contacts
DIMENSIONS TABLE
Centers “C”
Dim. “D”
Body Style
Available Sizes
0.300 [7.62]
0.400 [10.16]
2
2 thru 20
1
22 thru 40
0.600 [15.24]
0.700 [17.78]
2
2 thru 40
1
42 thru 48

 

Download Data Sheet 18003, Rev AA