Search by P/N

Search Parts by KEYWORD Any search words All search words

Get PRICING by P/N

Check INVENTORY by P/N

Download Our Web Guide for Quick Answers

Last Update:

CSP Test Socket for Optical Laser Failure Analysis w/Emission Microscopy*

Available with or without filters for UV, infrared and full spectrum applications, Aries’ new optical test socket is ideal for testing an optical sensor type chip and for EMMI testing a standard chip using an infrared head sensor. The optical test socket line can accommodate many different optical window and lens materials, including glass, sapphire, and plastic depending on operational requirements. The standard optical grade window on the 23023 socket uses a high-quality quartz V077 glass with a 98% transmission rate from <260nm in the UV to >2000nm in the infrared.

FEATURES
CUSTOMIZATION: IN ADDITION TO THE STANDARD PRODUCTS SHOWN ON THIS PAGE, ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. NOTE: ARIES RESERVES THE RIGHT TO CHANGE PRODUCT SPECIFICATIONS WITHOUT NOTICE.

• Any grid size available on 0.30mm pitch or larger
• Socket lid nests device into socket for a reliable connection
• Suitable for prototyping, test, or burn-in of CSP, BGA, µBGA and LGA devices
• ZIF style socket using Aries solderless, Au-plated pressure mount Spring Probe
• Special lid designs and/or materials can be quoted
• Socket easily located, mounted & removed from PCB
• Signal path during test only 0.077 [1.96]
• Available with Spring Probes or Kapton Elastomer Interposer
• 4-point crown insures “scrub” on solder oxides. Consult factory for other available probe styles
• The Au over Ni plated compression spring probes leave very small witness marks on the bottom surface of the device solder balls

MOUNTING CONSIDERATIONS

• NOTE: Sockets must be handled with care when mounting or removing sockets to/from PCB
• TEST PCB DIA. "P": 0.025 [0.64] (large probe 0.80mm pitch and larger)
  : 0.015 [0.38] (small probe 0.50-0.75mm pitch)
  : 0.012 [0.31] (small probe 0.40-0.45mm pitch)
  : 0.009 [0.23] (small probe 0.30-0.35mm pitch)
• TEST PCB DIA. SPRING PROBE & KIP PAD PLATING: 30µ min. [0.75µ] Au per MIL-G-45204 over 30µ [0.75µ] min. Ni per SEA AMS-QQ-N-290. Pad must be the same height as top surface of PCB. Please refer to the Custom Socket Drawing supplied by Aries after receipt of your order for your specific application.

GENERAL SPECIFICATIONS BODY MATERIAL: Ultem® or Torlon® 1dB BANDWIDTH: 1GHz (0.80mm pitch) (large probe) ESTIMATED CONTACT LIFE: 500,000 cycles COMPRESSION SPRING PROBES: heat-treated BeCu with 30µ min. [0.75µ] Au per MIL-G-45204 over 30µ min. [0.75µ] Ni per SAE AMS-QQ-N-290B CONTACT FORCE: : 15g per contact on 0.30-0.35mm pitch : 16g per contact on 0.40-0.45mm pitch : 25g per contact on 0.50-0.75mm pitch : 25g per contact on 0.80mm pitch or larger SCREWS, ALIGNMENT PINS: Stainless Steel INSERTS: Brass per QQ-B-626 OPERATING TEMPERATURE: -55ºC to 150ºC [-67º to 302º]

* Emission Microscopy (EMMI) is a powerful early-stage noninvasive failure analysis technique localizing failures and requiring little sample preparation. Flip-chip devices, difficult to study by other means, are easily studied through the die without decapsulation and often without thinning, making it an efficient optical analysis technique that will detect and localize certain integrated circuit failures. It can be performed from either the front or back sides of devices. Image: EMMI images showing light emission from failed devices at several locations (front side top)

TEST REPORTS

Select Test Report... 0.50mm Center Probe™ Test Contact 0.50mm Center Probe™ Test Contact Return Loss Graph 0.80mm Center Probe™ Test Contact 0.80mm Center Probe™ Test Contact Return Loss Graph Center Probe™ CSP DC Measurements w/Cycling Center Probe™ CSP RF Measurements w/Cycling Center Probe™ CSP DC Measurements w/o Cycling Center Probe™ CSP RF Measurements w/o Cycling

 

NOTICE		ORDERING INFORMATION
ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY for DIM. “A” - “K” CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED		Consult Factory Also See Data Sheets...   23021 µBGA up to 6.5mm   23017 µBGA up to 13mm   23018 µBGA up to 27mm   23018-APP w/Adj Pressure Pad   23019 µBGA up to 40mm   23020 µBGA up to 55mm   24013 RF up to 6.5mm   24008 RF up to 13mm   24009 RF up to 27mm   24011 RF up to 40mm   24012 RF up to 55mm   23016 CSP/BallNest™ Hybrid   24010 RF Machined Socket   23022 Kelvin Test Socket

 

Download Data Sheet 23023, Rev AA