Name: RF Test Socket with Replaceable Contact Strips – Now Available in High-Temp 250°C Version
SKU: 24001
Availability: instock

RF Test Socket with Replaceable Contact Strips – Now Available in High-Temp 250°C Version

FEATURES

User replaceable patented Microstrip™ contacts which lie flat on the DUT board, and become part of the transmission line decreasing down-time

Same high-frequency performance of our standard Microstrip™ contacts

Available in lead pitches from 0.4mm to 5.0mm

Easy-to-use Removal and Insertion Tool (P/N 1112390) shipped with every order

Replaceable contact strips available in just 1 week

Socket alignment pins provide accurate socket location to test board

Frequency response data available up to 19GHz

SOCKET BODY MATERIAL: either PEEK or Torlon^® PAI
HARDWARE: Stainless Steel
CONTACT RESISTANCE: <70mΩ
CONTACT INDUCTANCE: 0.01nH
CURRENT RATING: 4A (max.)
ESTIMATED CONTACT LIFE: 500,000 cycles
CONTACT FORCE: Consult Factory
INSERTION LOSS: <1dB to 16.7GHz (at 0.50mm pitch)

SUGGESTED MOUNTING HOLE SIZE: 0.120 [3.05] 4 places for #4-40 Screws
SUGGESTED LOCATING PIN HOLE SIZE: 0.063 [1.6] 4 places
SUGGESTED TEST BOARD PLATING: 30µ min. hard Au over 50µ min. Ni

ALL DIMENSIONS IN INCHES [MILLIMETERS]

ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED

PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED

CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, plating, sizes, and configurations can be furnished, depending on quantity. NOTE: Aries reserves the right to change products specifications without notice.

RF Test Socket with Replaceable Contact Strips – Now Available in High-Temp 250°C Version

RF Test Socket with Replaceable Contact Strips – Now Available in High-Temp 250°C Version

FEATURES

Ordering Information

Can’t Find What You're Looking For?